12 gauge receipe for green dot - Shotgun Forum
Nov 13, 2010 · I've acquired some green dot powder and have some WAA and a bunch of older Remington Premier light 9 hulls. I have lots of W209 primers and want to shoot a 1oz load. Also, I've come into lots of Federal 12S3 wads.
Please share your GREEN DOT recipes - Shotgun Forum
Mar 25, 2010 · Alliant lists a single 1 ounce load with the CCI209M primer and 22 grains of Green Dot for 1290 fps @ 9100 psi. Additionally, they list 1 1/8 ounce with the CCI209M and 6 different wads with 22 grains, all under 11,000 psi.
Green Dot - Alliant Powder
It delivers precise burn rates for uniformly tight patterns, and you'll appreciate the lower recoil. Versatile for target and field. Best long range clay target powder creating tight and uniform patterns. View All Green Dot ® Recipes.
Green Dot 1 ounce load - Trapshooters Forum
Jun 24, 2009 · 19.0 - 19.5 grains of Green Dot, TGT12 Wad, 1 oz hard 8's or 8 1/2's, Federal or Winchester primer, Remington STS hull. This load runs a little over 1200 fps and smokes targets. The patterns are as good as any 1 oz load I have tried and it's consistant in cold weather as well.
green dot - Shotgun Forum
Apr 9, 2009 · If I could only use one powder for 12-gauge 1-ounce and, especially, 1 1/8-ounce loads it would be Green Dot. The stuff is amazing. For relatively low pressure loads (for a double-based powder) I know of no powder that yields denser patterns.
Reloader's Guide - Alliant Powder
Reloader's Guide Alliant Powder Reload Recipes. ← Back. Recipe
12 gauge 2 1/2" Green Dot - Parker Gun Collectors Association …
May 22, 2020 · Green Dot is a little slow burning for real light loads, like 7/8 ounce, so stick to 1 ounce or more at 1200 FPS or more. The Alliant site is full of loads. Ignore the length of the cartridge. Thanks, I appreciate the information. 1 1/8 ounce loads should be …
Green Dot 12 Gauge Load - SASS Wire Forum
Nov 1, 2021 · I use 13 gr of Green Dot with 7/8 oz shot. Lighter than Featherlights and still knock down any targets.
Inherited “Green Dot” - any recommended loads using AA...
Jan 12, 2018 · In 12 ga., with Green Dot, in the HS hull, I would recommend using the Down Range DRA wads. Pink for 1 oz. and copper for 1 1/8 oz. Or, use a wad designed for 1/8. oz more shot than you are dropping.
Favortite Green Dot Load @1225+ fps - Trapshooters Forum
Mar 30, 2011 · 20.0 - 20.5 grains of Green Dot, Remington Hull, Winchester W209 primer, Rem Figure 8 wad or clone, 1 1/8 oz of hard shot. 20.0 grains is listed at 8600 PSI on Alliant's site. They also list the velocity at 1200 fps.