If you intend to race your Pico you will have to attach your sail numbers. 1. Identify the sail number of your LaserPerformance Pico by referring to the builder’s serial number plate positioned on the starboard (right hand) side of the aft/rear facing mast buttress. 2. Cut the required sail numbers from the
LASER PERFORMANCE PICO RIGGING MANUAL Pdf Download
Sail Numbers If you intend to race your Pico you will have to attach your sail numbers. 1. Identify the sail number of your LaserPerformance Pico by referring to the builder’s serial number plate positioned on the starboard (right hand) side of the aft/rear facing mast buttress.
Pico Rigging Instructions Your Pico comes in the following main component par ts: • Standard fi tted hull • Standard sail kit • Mast assembly – upper and lower mast and boom • Rudder and daggerboard kit – Rudder assembly, til
LASER PERFORMANCE PICO RIGGING MANUAL Pdf Download
Sail Number positioning – Race Sails If you intend to race your Pico you will have to attach 60 mm your sail numbers. It is advised to apply the sail numbers in a dry, clean and wind free environment.
How to rig a Pico - YouTube
Follow Richard as he guides you through how to rig a Pico ready to sail!
The Pico rigging instructions are a guide to rigging your boat. Due to production supplies certain parts may be slightly modified from those shown. This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the task of learning to sail a boat. 4.1. Unpacking your Pico. 4.2. Unpacking Pico Sport pack.
LASER PICO RIGGING MANUAL Pdf Download | ManualsLib
Sail Number positioning – Standard sails If you intend to race your Pico you will have to attach your sail numbers. It is advised to apply the sail numbers in a dry, clean and wind free environment.
Unpack the major parts listed below and lay them out on a soft piece of ground free of sharp objects. To avoid damaging contents, do not cut into packaging. You will need two adjustable wrenches and knowledge of the following knots. Hull. Mainsail. Line package (all lines are labeled)
Pico Rigging Instructions . Secure necessary equipment: Put on a PFD. Select a Pico and inspect for obvious problems (missing or broken parts, etc.) Remove the drain plug and drain the hull by placing something under the bow, such as the large plastic blocks. Replace the …
9 From the sail shed, get a Pico rudder/tiller assembly and a Pico boom. 9 From the locker to the right of the sail shed, get the mast which has the sail wrapped around it. IMPORTANT: Keep an eye on both ends of the mast when carrying it to the dock and while on the dock. It is very easy to swing around and hit something or someone.
- Some results have been removed